VESPA 1965 MODEL NEW PX 150CC ENGINE FULLY RESTORED free shipping
Kaufpreis: Є 1,00 Angebot machen
Artikelmerkmale
| Gebraucht: Artikel wurde bereits benutzt. Weitere Einzelheiten, z. B. genaue Beschreibung etwaiger Fehler oder Mängel im Angebot des Verkäufers. |
VESPA 1965 gebraucht günstig kaufen
Current customer rating: ()
based on 2 votes
based on 2 votes
Fahrzeugbeschreibung
Hi everybody,
You all are looking at fully restored Vespa scooter.
The Vespa is fully restored with up gradation of brand new PX 150cc 5 port engine with all new parts.
SMALL DESCRIPTION OF RESTORATION PROCESS
- Chassis and other body parts: such as panels and front mudguard nicely dented side and we make a rough fixing of bodyline to check the cemetery.
- In this stage we Mainly check the frame is not to be rotten from the front bottom, from the rear and no plate from the sides where the side panels to be fixed ..
- Then we do the sandblast on all the body parts of the scooter, to take the rust out and complete with the sand blasting its easy to check all the rotten parts Which we will replace with new ones.
- After this we send the chassis and the front fork to the machine shop to make them 100% straight.
- On the scooter, before we do the painting primer antirust coating on frame. Then we do painting with two component paint with Lacker finish on top with a hardener coating.
- Now after painting our professional mechanics" do all the fitting with each and every washer.
- Do all the polishing on the engine chambers and refit the engine with Following changes:
- New crank with all new bushes and fitted with all new bearings and new cylinder 150cc.
- Totally new clutch
- Change all the oil seals and bushes of the engine too.
- New gear box sprockets with new shims in gear box for better working and good sound.
- When the scooter is ready we check the scooter and make a ride on 25 miles on each scooter.
SMALL PARTS USED IN DISCRIPTION OF NEW SCOOTER
- Engine with all new parts even engine casing so brand new 5 port 150cc.
- Petrol tank with antirust coating inside.
- Complete rubber set
- Wheel rims, tires and tubes are of Dunlop mark.
- All electrics with all new switches, headlight, backlight, combine unit, and regulators.
- Switch housing and gear housing new and polished.
- Front mudguard and rear mudguard New
- New seat
- Handle bearings, cup and cone sets.
- Rear break drum, front drum break alongwith axel and bearings and THEREFORE break new shoes.
- Speedometer on top in KM and bottom with Speedo drive set.
And many other new parts in the scooter.
YOU WILL GET WITH SCOOTER THE FOLLOWING
- Cable set
- Tool Kit
- Gasket set
- Rain Cover
- Normal Maintenance Manual
- Old log book of scooter
- Small pot of paint in case if there is any damage in shipping to repair.
Documents you receive after shipping the bike
- FIRST & SECOND original bill of Ladings
- Invoice
- Form A (the certificate of origin) to save the import duty.
- Log Book of the bike
PAYMENT DETAILS
Payment will be accepted through Paypal only, our paypal address is spareautotrade@gmail.com
PACKING & SHIPPING
We pack the scooter in a wooden crate Completely closed from all sides.
,
The size of the box in which one scooter is packed is 215cm length, 36cm breadth and height 115cms.
The shipping is through sea freight and shipping is up to Hamburg / Rotterdam / Antwerp / Zurich PORTS and it costs free
WE SHIP WORLD WIDE, kindly before buying you can ask where you want rate
After the payment, with in 10 working days we ship the scooter and in next 5 working days we will send the bill of lading and invoice copies and log books of the scooters at your home via UPS or Fedex.
So you get FORM A alongwith it so That You Have To Pay only 4% import duty.
With in 75 days to 90 days the scooter will be at your sea port.
Remember you have to pay the import duty + VAT and whatever the taxes/port charges at your port.
Hope you all like the product, thanks for looking
Have a nice day
You all are looking at fully restored Vespa scooter.
The Vespa is fully restored with up gradation of brand new PX 150cc 5 port engine with all new parts.
SMALL DESCRIPTION OF RESTORATION PROCESS
- Chassis and other body parts: such as panels and front mudguard nicely dented side and we make a rough fixing of bodyline to check the cemetery.
- In this stage we Mainly check the frame is not to be rotten from the front bottom, from the rear and no plate from the sides where the side panels to be fixed ..
- Then we do the sandblast on all the body parts of the scooter, to take the rust out and complete with the sand blasting its easy to check all the rotten parts Which we will replace with new ones.
- After this we send the chassis and the front fork to the machine shop to make them 100% straight.
- On the scooter, before we do the painting primer antirust coating on frame. Then we do painting with two component paint with Lacker finish on top with a hardener coating.
- Now after painting our professional mechanics" do all the fitting with each and every washer.
- Do all the polishing on the engine chambers and refit the engine with Following changes:
- New crank with all new bushes and fitted with all new bearings and new cylinder 150cc.
- Totally new clutch
- Change all the oil seals and bushes of the engine too.
- New gear box sprockets with new shims in gear box for better working and good sound.
- When the scooter is ready we check the scooter and make a ride on 25 miles on each scooter.
SMALL PARTS USED IN DISCRIPTION OF NEW SCOOTER
- Engine with all new parts even engine casing so brand new 5 port 150cc.
- Petrol tank with antirust coating inside.
- Complete rubber set
- Wheel rims, tires and tubes are of Dunlop mark.
- All electrics with all new switches, headlight, backlight, combine unit, and regulators.
- Switch housing and gear housing new and polished.
- Front mudguard and rear mudguard New
- New seat
- Handle bearings, cup and cone sets.
- Rear break drum, front drum break alongwith axel and bearings and THEREFORE break new shoes.
- Speedometer on top in KM and bottom with Speedo drive set.
And many other new parts in the scooter.
YOU WILL GET WITH SCOOTER THE FOLLOWING
- Cable set
- Tool Kit
- Gasket set
- Rain Cover
- Normal Maintenance Manual
- Old log book of scooter
- Small pot of paint in case if there is any damage in shipping to repair.
Documents you receive after shipping the bike
- FIRST & SECOND original bill of Ladings
- Invoice
- Form A (the certificate of origin) to save the import duty.
- Log Book of the bike
PAYMENT DETAILS
Payment will be accepted through Paypal only, our paypal address is spareautotrade@gmail.com
PACKING & SHIPPING
We pack the scooter in a wooden crate Completely closed from all sides.
,
The size of the box in which one scooter is packed is 215cm length, 36cm breadth and height 115cms.
The shipping is through sea freight and shipping is up to Hamburg / Rotterdam / Antwerp / Zurich PORTS and it costs free
WE SHIP WORLD WIDE, kindly before buying you can ask where you want rate
After the payment, with in 10 working days we ship the scooter and in next 5 working days we will send the bill of lading and invoice copies and log books of the scooters at your home via UPS or Fedex.
So you get FORM A alongwith it so That You Have To Pay only 4% import duty.
With in 75 days to 90 days the scooter will be at your sea port.
Remember you have to pay the import duty + VAT and whatever the taxes/port charges at your port.
Hope you all like the product, thanks for looking
Have a nice day